Main features of the UMG 605-PRO<\/h2>\n<\/div>\n\n\nThe power quality analyzer, in accordance with EN 50160, is particularly suitable for DIN rail mounting. It is used to monitor the power quality in accordance with common standards, e.g. EN 6100024. The UMG 605-PRO is suitable for recording short and long-term flicker as well as for Profibus DP and Profibus DP V0. The UMG has two digital inputs and outputs and an additional temperature measurement input.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\nHARMONICS<\/h3>\n<\/div>\n\nHarmonics are caused by equipment with non-linear characteristics, such as transformers operated in saturation, energy-saving lamps, frequency converters and power electronics. They burden the grid with additional currents and can affect or even destroy equipment. These grid perturbations can be detected and documented using power quality analyzers.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\nALARM MANAGEMENT<\/h3>\n<\/div>\n\n\nThe GridVis\u00ae alarm management system monitors all measurement parameters obtained by the UMG measurement devices. It includes escalation management, logbook function and user administration for individual notifications by e-mail, pop-up window on the monitor, etc.<\/p>\n
In addition to monitoring RMS values, short-term interruptions and transients as well as communication with the measuring devices can also be monitored.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\nREPORTING<\/h3>\n<\/div>\n\n\nAn important component of the grid analysis is the report generation of GridVis\u00ae. It provides a quick and clear representation of the voltage quality in defined time periods. The power quality reports are based on international standards (EN 50160, EN 61000-2-4, IEEE 519, etc.).<\/p>\n
In addition to the PQ reports, energy consumption reports are of great benefit to the user. Generation and dispatch can take place automatically according to freely definable schedules.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\nFLICKER<\/h3>\n<\/div>\n\n\nFlicker is the subjective impression of visually perceptible fluctuations in brightness caused by temporal changes in luminance or spectral distribution. This is caused by voltage fluctuations.<\/p>\n
Above a certain limit, flicker phenomena are disturbing and may be harmful to health. The standard DIN EN 61000-4-15 regulates further details.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\nMEMORY<\/h3>\n<\/div>\n\nMany UMG measurement devices have their own memory with typical recording ranges of up to 2 years. Recording is freely configurable. A 128 MByte memory can store around 5,000,000 memory values, a 256 MByte memory can store around 10,000,000 memory values.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\nE-MAIL<\/h3>\n<\/div>\n\n\nNotification by e-mail is an ideal tool for alarm and escalation management of the UMG measurement devices and the GridVis\u00ae software. This allows recipients to be informed in detail about an event straight away.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Power quality monitoring<\/li>\n
- Ethernet gateway for subordinate measuring points<\/li>\n
- Analysis of electrical disturbance variables for grid problems<\/li>\n<\/ul>\n<\/div><\/div><\/div>
\n- Report generator for various power quality standards<\/li>\n
- Control tasks, e.g. depending on measured or limit values reached<\/li>\n
- Transducer for building management system or PLC<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 40th harmonic<\/li>\n
- Unbalance Distortion factor THD-U \/ THD-I<\/li>\n
- Measurement of positive, negative and zero sequence<\/li>\n
- Short interruptions (from 20 ms)<\/li>\n
- Recording and storage of transients (> 50 \u03bcs)<\/li>\n
- Start-up processes<\/li>\n
- Fault recorder function<\/li>\n
- Rotary field display<\/li>\n<\/ul>\n<\/div><\/div><\/div>
PERFORMANCE<\/h3>\n<\/div>\n- 4 voltage and 4 current measurement inputs<\/li>\n
- Acquisition and digitization of RMS values (true RMS) of currents and voltages (15 – 440 Hz)<\/li>\n
- Continuous sampling of the voltage and current measurement inputs at 20 kHz<\/li>\n
- Recording of more than 2,000 measured values per measurement cycle (200 ms)<\/li>\n
- For measuring current events<\/li>\n
- Setting of a rated current possible<\/li>\n
- The fourth current measurement input is suitable for measuring the current in the neutral or PE conductor or for measuring any potential difference between N and PE<\/li>\n
- Large measured data memory (memory capacity = 5,000,000 measured values)<\/li>\n
- Simple remote measurement data retrieval via the device’s own homepage<\/li>\n
- All interfaces can be used simultaneously<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVINCING REPORTING WITH GRIDVIS\u00ae<\/h3>\n<\/div>\n- Automatic generation and dispatch of power quality reports<\/li>\n
- Power quality reports in accordance with EN 50160, EN 61000-2-4, IEEE519<\/li>\n
- Illustration of the ITI (CBEMA) curve<\/li>\n
- Freely definable scheduling for report generation<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Fast, cost-optimized and reliable communication thanks to the connection to an existing Ethernet architecture<\/li>\n
- Integration in PLC systems and BMS<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Simultaneous query of the interfaces possible<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
HIGHSPEED MODBUS<\/h3>\n<\/div>\n- Fast and reliable data transmission via RS485 interface<\/li>\n
- Speed up to 921.6 kB\/s<\/li>\n<\/ul>\n<\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options on the device, 7 programs simultaneously (PLC functionality)<\/li>\n
- Jasic\u00ae source<\/sup> code programming<\/li>\n
- Functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVENIENT HOMEPAGE AND E-MAIL FUNCTIONS<\/h3>\n<\/div>\n- Information conveniently available by e-mail and via the device homepage<\/li>\n
- Access to the powerful device homepage via web browser<\/li>\n
- Online data, historical data, graphs of events and much more available directly from the homepage<\/li>\n<\/ul>\n<\/div><\/div><\/div>
LARGE MEASUREMENT DATA MEMORY<\/h3>\n<\/div>\n- 128 MByte<\/li>\n
- 5,000,000 Memory values<\/li>\n
- Recording range up to 2 years<\/li>\n
- Recording freely configurable<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
The power quality analyzer, in accordance with EN 50160, is particularly suitable for DIN rail mounting. It is used to monitor the power quality in accordance with common standards, e.g. EN 6100024. The UMG 605-PRO is suitable for recording short and long-term flicker as well as for Profibus DP and Profibus DP V0. The UMG has two digital inputs and outputs and an additional temperature measurement input.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
HARMONICS<\/h3>\n<\/div>\n\nHarmonics are caused by equipment with non-linear characteristics, such as transformers operated in saturation, energy-saving lamps, frequency converters and power electronics. They burden the grid with additional currents and can affect or even destroy equipment. These grid perturbations can be detected and documented using power quality analyzers.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\nALARM MANAGEMENT<\/h3>\n<\/div>\n\n\nThe GridVis\u00ae alarm management system monitors all measurement parameters obtained by the UMG measurement devices. It includes escalation management, logbook function and user administration for individual notifications by e-mail, pop-up window on the monitor, etc.<\/p>\n
In addition to monitoring RMS values, short-term interruptions and transients as well as communication with the measuring devices can also be monitored.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\nREPORTING<\/h3>\n<\/div>\n\n\nAn important component of the grid analysis is the report generation of GridVis\u00ae. It provides a quick and clear representation of the voltage quality in defined time periods. The power quality reports are based on international standards (EN 50160, EN 61000-2-4, IEEE 519, etc.).<\/p>\n
In addition to the PQ reports, energy consumption reports are of great benefit to the user. Generation and dispatch can take place automatically according to freely definable schedules.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\nFLICKER<\/h3>\n<\/div>\n\n\nFlicker is the subjective impression of visually perceptible fluctuations in brightness caused by temporal changes in luminance or spectral distribution. This is caused by voltage fluctuations.<\/p>\n
Above a certain limit, flicker phenomena are disturbing and may be harmful to health. The standard DIN EN 61000-4-15 regulates further details.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\nMEMORY<\/h3>\n<\/div>\n\nMany UMG measurement devices have their own memory with typical recording ranges of up to 2 years. Recording is freely configurable. A 128 MByte memory can store around 5,000,000 memory values, a 256 MByte memory can store around 10,000,000 memory values.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\nE-MAIL<\/h3>\n<\/div>\n\n\nNotification by e-mail is an ideal tool for alarm and escalation management of the UMG measurement devices and the GridVis\u00ae software. This allows recipients to be informed in detail about an event straight away.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Power quality monitoring<\/li>\n
- Ethernet gateway for subordinate measuring points<\/li>\n
- Analysis of electrical disturbance variables for grid problems<\/li>\n<\/ul>\n<\/div><\/div><\/div>
\n- Report generator for various power quality standards<\/li>\n
- Control tasks, e.g. depending on measured or limit values reached<\/li>\n
- Transducer for building management system or PLC<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 40th harmonic<\/li>\n
- Unbalance Distortion factor THD-U \/ THD-I<\/li>\n
- Measurement of positive, negative and zero sequence<\/li>\n
- Short interruptions (from 20 ms)<\/li>\n
- Recording and storage of transients (> 50 \u03bcs)<\/li>\n
- Start-up processes<\/li>\n
- Fault recorder function<\/li>\n
- Rotary field display<\/li>\n<\/ul>\n<\/div><\/div><\/div>
PERFORMANCE<\/h3>\n<\/div>\n- 4 voltage and 4 current measurement inputs<\/li>\n
- Acquisition and digitization of RMS values (true RMS) of currents and voltages (15 – 440 Hz)<\/li>\n
- Continuous sampling of the voltage and current measurement inputs at 20 kHz<\/li>\n
- Recording of more than 2,000 measured values per measurement cycle (200 ms)<\/li>\n
- For measuring current events<\/li>\n
- Setting of a rated current possible<\/li>\n
- The fourth current measurement input is suitable for measuring the current in the neutral or PE conductor or for measuring any potential difference between N and PE<\/li>\n
- Large measured data memory (memory capacity = 5,000,000 measured values)<\/li>\n
- Simple remote measurement data retrieval via the device’s own homepage<\/li>\n
- All interfaces can be used simultaneously<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVINCING REPORTING WITH GRIDVIS\u00ae<\/h3>\n<\/div>\n- Automatic generation and dispatch of power quality reports<\/li>\n
- Power quality reports in accordance with EN 50160, EN 61000-2-4, IEEE519<\/li>\n
- Illustration of the ITI (CBEMA) curve<\/li>\n
- Freely definable scheduling for report generation<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Fast, cost-optimized and reliable communication thanks to the connection to an existing Ethernet architecture<\/li>\n
- Integration in PLC systems and BMS<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Simultaneous query of the interfaces possible<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
HIGHSPEED MODBUS<\/h3>\n<\/div>\n- Fast and reliable data transmission via RS485 interface<\/li>\n
- Speed up to 921.6 kB\/s<\/li>\n<\/ul>\n<\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options on the device, 7 programs simultaneously (PLC functionality)<\/li>\n
- Jasic\u00ae source<\/sup> code programming<\/li>\n
- Functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVENIENT HOMEPAGE AND E-MAIL FUNCTIONS<\/h3>\n<\/div>\n- Information conveniently available by e-mail and via the device homepage<\/li>\n
- Access to the powerful device homepage via web browser<\/li>\n
- Online data, historical data, graphs of events and much more available directly from the homepage<\/li>\n<\/ul>\n<\/div><\/div><\/div>
LARGE MEASUREMENT DATA MEMORY<\/h3>\n<\/div>\n- 128 MByte<\/li>\n
- 5,000,000 Memory values<\/li>\n
- Recording range up to 2 years<\/li>\n
- Recording freely configurable<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
Harmonics are caused by equipment with non-linear characteristics, such as transformers operated in saturation, energy-saving lamps, frequency converters and power electronics. They burden the grid with additional currents and can affect or even destroy equipment. These grid perturbations can be detected and documented using power quality analyzers.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
ALARM MANAGEMENT<\/h3>\n<\/div>\n\n\nThe GridVis\u00ae alarm management system monitors all measurement parameters obtained by the UMG measurement devices. It includes escalation management, logbook function and user administration for individual notifications by e-mail, pop-up window on the monitor, etc.<\/p>\n
In addition to monitoring RMS values, short-term interruptions and transients as well as communication with the measuring devices can also be monitored.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\nREPORTING<\/h3>\n<\/div>\n\n\nAn important component of the grid analysis is the report generation of GridVis\u00ae. It provides a quick and clear representation of the voltage quality in defined time periods. The power quality reports are based on international standards (EN 50160, EN 61000-2-4, IEEE 519, etc.).<\/p>\n
In addition to the PQ reports, energy consumption reports are of great benefit to the user. Generation and dispatch can take place automatically according to freely definable schedules.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\nFLICKER<\/h3>\n<\/div>\n\n\nFlicker is the subjective impression of visually perceptible fluctuations in brightness caused by temporal changes in luminance or spectral distribution. This is caused by voltage fluctuations.<\/p>\n
Above a certain limit, flicker phenomena are disturbing and may be harmful to health. The standard DIN EN 61000-4-15 regulates further details.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\nMEMORY<\/h3>\n<\/div>\n\nMany UMG measurement devices have their own memory with typical recording ranges of up to 2 years. Recording is freely configurable. A 128 MByte memory can store around 5,000,000 memory values, a 256 MByte memory can store around 10,000,000 memory values.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\nE-MAIL<\/h3>\n<\/div>\n\n\nNotification by e-mail is an ideal tool for alarm and escalation management of the UMG measurement devices and the GridVis\u00ae software. This allows recipients to be informed in detail about an event straight away.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Power quality monitoring<\/li>\n
- Ethernet gateway for subordinate measuring points<\/li>\n
- Analysis of electrical disturbance variables for grid problems<\/li>\n<\/ul>\n<\/div><\/div><\/div>
\n- Report generator for various power quality standards<\/li>\n
- Control tasks, e.g. depending on measured or limit values reached<\/li>\n
- Transducer for building management system or PLC<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 40th harmonic<\/li>\n
- Unbalance Distortion factor THD-U \/ THD-I<\/li>\n
- Measurement of positive, negative and zero sequence<\/li>\n
- Short interruptions (from 20 ms)<\/li>\n
- Recording and storage of transients (> 50 \u03bcs)<\/li>\n
- Start-up processes<\/li>\n
- Fault recorder function<\/li>\n
- Rotary field display<\/li>\n<\/ul>\n<\/div><\/div><\/div>
PERFORMANCE<\/h3>\n<\/div>\n- 4 voltage and 4 current measurement inputs<\/li>\n
- Acquisition and digitization of RMS values (true RMS) of currents and voltages (15 – 440 Hz)<\/li>\n
- Continuous sampling of the voltage and current measurement inputs at 20 kHz<\/li>\n
- Recording of more than 2,000 measured values per measurement cycle (200 ms)<\/li>\n
- For measuring current events<\/li>\n
- Setting of a rated current possible<\/li>\n
- The fourth current measurement input is suitable for measuring the current in the neutral or PE conductor or for measuring any potential difference between N and PE<\/li>\n
- Large measured data memory (memory capacity = 5,000,000 measured values)<\/li>\n
- Simple remote measurement data retrieval via the device’s own homepage<\/li>\n
- All interfaces can be used simultaneously<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVINCING REPORTING WITH GRIDVIS\u00ae<\/h3>\n<\/div>\n- Automatic generation and dispatch of power quality reports<\/li>\n
- Power quality reports in accordance with EN 50160, EN 61000-2-4, IEEE519<\/li>\n
- Illustration of the ITI (CBEMA) curve<\/li>\n
- Freely definable scheduling for report generation<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Fast, cost-optimized and reliable communication thanks to the connection to an existing Ethernet architecture<\/li>\n
- Integration in PLC systems and BMS<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Simultaneous query of the interfaces possible<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
HIGHSPEED MODBUS<\/h3>\n<\/div>\n- Fast and reliable data transmission via RS485 interface<\/li>\n
- Speed up to 921.6 kB\/s<\/li>\n<\/ul>\n<\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options on the device, 7 programs simultaneously (PLC functionality)<\/li>\n
- Jasic\u00ae source<\/sup> code programming<\/li>\n
- Functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVENIENT HOMEPAGE AND E-MAIL FUNCTIONS<\/h3>\n<\/div>\n- Information conveniently available by e-mail and via the device homepage<\/li>\n
- Access to the powerful device homepage via web browser<\/li>\n
- Online data, historical data, graphs of events and much more available directly from the homepage<\/li>\n<\/ul>\n<\/div><\/div><\/div>
LARGE MEASUREMENT DATA MEMORY<\/h3>\n<\/div>\n- 128 MByte<\/li>\n
- 5,000,000 Memory values<\/li>\n
- Recording range up to 2 years<\/li>\n
- Recording freely configurable<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
The GridVis\u00ae alarm management system monitors all measurement parameters obtained by the UMG measurement devices. It includes escalation management, logbook function and user administration for individual notifications by e-mail, pop-up window on the monitor, etc.<\/p>\n
In addition to monitoring RMS values, short-term interruptions and transients as well as communication with the measuring devices can also be monitored.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
REPORTING<\/h3>\n<\/div>\n\n\nAn important component of the grid analysis is the report generation of GridVis\u00ae. It provides a quick and clear representation of the voltage quality in defined time periods. The power quality reports are based on international standards (EN 50160, EN 61000-2-4, IEEE 519, etc.).<\/p>\n
In addition to the PQ reports, energy consumption reports are of great benefit to the user. Generation and dispatch can take place automatically according to freely definable schedules.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\nFLICKER<\/h3>\n<\/div>\n\n\nFlicker is the subjective impression of visually perceptible fluctuations in brightness caused by temporal changes in luminance or spectral distribution. This is caused by voltage fluctuations.<\/p>\n
Above a certain limit, flicker phenomena are disturbing and may be harmful to health. The standard DIN EN 61000-4-15 regulates further details.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\nMEMORY<\/h3>\n<\/div>\n\nMany UMG measurement devices have their own memory with typical recording ranges of up to 2 years. Recording is freely configurable. A 128 MByte memory can store around 5,000,000 memory values, a 256 MByte memory can store around 10,000,000 memory values.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\nE-MAIL<\/h3>\n<\/div>\n\n\nNotification by e-mail is an ideal tool for alarm and escalation management of the UMG measurement devices and the GridVis\u00ae software. This allows recipients to be informed in detail about an event straight away.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Power quality monitoring<\/li>\n
- Ethernet gateway for subordinate measuring points<\/li>\n
- Analysis of electrical disturbance variables for grid problems<\/li>\n<\/ul>\n<\/div><\/div><\/div>
\n- Report generator for various power quality standards<\/li>\n
- Control tasks, e.g. depending on measured or limit values reached<\/li>\n
- Transducer for building management system or PLC<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 40th harmonic<\/li>\n
- Unbalance Distortion factor THD-U \/ THD-I<\/li>\n
- Measurement of positive, negative and zero sequence<\/li>\n
- Short interruptions (from 20 ms)<\/li>\n
- Recording and storage of transients (> 50 \u03bcs)<\/li>\n
- Start-up processes<\/li>\n
- Fault recorder function<\/li>\n
- Rotary field display<\/li>\n<\/ul>\n<\/div><\/div><\/div>
PERFORMANCE<\/h3>\n<\/div>\n- 4 voltage and 4 current measurement inputs<\/li>\n
- Acquisition and digitization of RMS values (true RMS) of currents and voltages (15 – 440 Hz)<\/li>\n
- Continuous sampling of the voltage and current measurement inputs at 20 kHz<\/li>\n
- Recording of more than 2,000 measured values per measurement cycle (200 ms)<\/li>\n
- For measuring current events<\/li>\n
- Setting of a rated current possible<\/li>\n
- The fourth current measurement input is suitable for measuring the current in the neutral or PE conductor or for measuring any potential difference between N and PE<\/li>\n
- Large measured data memory (memory capacity = 5,000,000 measured values)<\/li>\n
- Simple remote measurement data retrieval via the device’s own homepage<\/li>\n
- All interfaces can be used simultaneously<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVINCING REPORTING WITH GRIDVIS\u00ae<\/h3>\n<\/div>\n- Automatic generation and dispatch of power quality reports<\/li>\n
- Power quality reports in accordance with EN 50160, EN 61000-2-4, IEEE519<\/li>\n
- Illustration of the ITI (CBEMA) curve<\/li>\n
- Freely definable scheduling for report generation<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Fast, cost-optimized and reliable communication thanks to the connection to an existing Ethernet architecture<\/li>\n
- Integration in PLC systems and BMS<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Simultaneous query of the interfaces possible<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
HIGHSPEED MODBUS<\/h3>\n<\/div>\n- Fast and reliable data transmission via RS485 interface<\/li>\n
- Speed up to 921.6 kB\/s<\/li>\n<\/ul>\n<\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options on the device, 7 programs simultaneously (PLC functionality)<\/li>\n
- Jasic\u00ae source<\/sup> code programming<\/li>\n
- Functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVENIENT HOMEPAGE AND E-MAIL FUNCTIONS<\/h3>\n<\/div>\n- Information conveniently available by e-mail and via the device homepage<\/li>\n
- Access to the powerful device homepage via web browser<\/li>\n
- Online data, historical data, graphs of events and much more available directly from the homepage<\/li>\n<\/ul>\n<\/div><\/div><\/div>
LARGE MEASUREMENT DATA MEMORY<\/h3>\n<\/div>\n- 128 MByte<\/li>\n
- 5,000,000 Memory values<\/li>\n
- Recording range up to 2 years<\/li>\n
- Recording freely configurable<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
An important component of the grid analysis is the report generation of GridVis\u00ae. It provides a quick and clear representation of the voltage quality in defined time periods. The power quality reports are based on international standards (EN 50160, EN 61000-2-4, IEEE 519, etc.).<\/p>\n
In addition to the PQ reports, energy consumption reports are of great benefit to the user. Generation and dispatch can take place automatically according to freely definable schedules.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
FLICKER<\/h3>\n<\/div>\n\n\nFlicker is the subjective impression of visually perceptible fluctuations in brightness caused by temporal changes in luminance or spectral distribution. This is caused by voltage fluctuations.<\/p>\n
Above a certain limit, flicker phenomena are disturbing and may be harmful to health. The standard DIN EN 61000-4-15 regulates further details.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\nMEMORY<\/h3>\n<\/div>\n\nMany UMG measurement devices have their own memory with typical recording ranges of up to 2 years. Recording is freely configurable. A 128 MByte memory can store around 5,000,000 memory values, a 256 MByte memory can store around 10,000,000 memory values.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\nE-MAIL<\/h3>\n<\/div>\n\n\nNotification by e-mail is an ideal tool for alarm and escalation management of the UMG measurement devices and the GridVis\u00ae software. This allows recipients to be informed in detail about an event straight away.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Power quality monitoring<\/li>\n
- Ethernet gateway for subordinate measuring points<\/li>\n
- Analysis of electrical disturbance variables for grid problems<\/li>\n<\/ul>\n<\/div><\/div><\/div>
\n- Report generator for various power quality standards<\/li>\n
- Control tasks, e.g. depending on measured or limit values reached<\/li>\n
- Transducer for building management system or PLC<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 40th harmonic<\/li>\n
- Unbalance Distortion factor THD-U \/ THD-I<\/li>\n
- Measurement of positive, negative and zero sequence<\/li>\n
- Short interruptions (from 20 ms)<\/li>\n
- Recording and storage of transients (> 50 \u03bcs)<\/li>\n
- Start-up processes<\/li>\n
- Fault recorder function<\/li>\n
- Rotary field display<\/li>\n<\/ul>\n<\/div><\/div><\/div>
PERFORMANCE<\/h3>\n<\/div>\n- 4 voltage and 4 current measurement inputs<\/li>\n
- Acquisition and digitization of RMS values (true RMS) of currents and voltages (15 – 440 Hz)<\/li>\n
- Continuous sampling of the voltage and current measurement inputs at 20 kHz<\/li>\n
- Recording of more than 2,000 measured values per measurement cycle (200 ms)<\/li>\n
- For measuring current events<\/li>\n
- Setting of a rated current possible<\/li>\n
- The fourth current measurement input is suitable for measuring the current in the neutral or PE conductor or for measuring any potential difference between N and PE<\/li>\n
- Large measured data memory (memory capacity = 5,000,000 measured values)<\/li>\n
- Simple remote measurement data retrieval via the device’s own homepage<\/li>\n
- All interfaces can be used simultaneously<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVINCING REPORTING WITH GRIDVIS\u00ae<\/h3>\n<\/div>\n- Automatic generation and dispatch of power quality reports<\/li>\n
- Power quality reports in accordance with EN 50160, EN 61000-2-4, IEEE519<\/li>\n
- Illustration of the ITI (CBEMA) curve<\/li>\n
- Freely definable scheduling for report generation<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Fast, cost-optimized and reliable communication thanks to the connection to an existing Ethernet architecture<\/li>\n
- Integration in PLC systems and BMS<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Simultaneous query of the interfaces possible<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
HIGHSPEED MODBUS<\/h3>\n<\/div>\n- Fast and reliable data transmission via RS485 interface<\/li>\n
- Speed up to 921.6 kB\/s<\/li>\n<\/ul>\n<\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options on the device, 7 programs simultaneously (PLC functionality)<\/li>\n
- Jasic\u00ae source<\/sup> code programming<\/li>\n
- Functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVENIENT HOMEPAGE AND E-MAIL FUNCTIONS<\/h3>\n<\/div>\n- Information conveniently available by e-mail and via the device homepage<\/li>\n
- Access to the powerful device homepage via web browser<\/li>\n
- Online data, historical data, graphs of events and much more available directly from the homepage<\/li>\n<\/ul>\n<\/div><\/div><\/div>
LARGE MEASUREMENT DATA MEMORY<\/h3>\n<\/div>\n- 128 MByte<\/li>\n
- 5,000,000 Memory values<\/li>\n
- Recording range up to 2 years<\/li>\n
- Recording freely configurable<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
Flicker is the subjective impression of visually perceptible fluctuations in brightness caused by temporal changes in luminance or spectral distribution. This is caused by voltage fluctuations.<\/p>\n
Above a certain limit, flicker phenomena are disturbing and may be harmful to health. The standard DIN EN 61000-4-15 regulates further details.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
MEMORY<\/h3>\n<\/div>\n\nMany UMG measurement devices have their own memory with typical recording ranges of up to 2 years. Recording is freely configurable. A 128 MByte memory can store around 5,000,000 memory values, a 256 MByte memory can store around 10,000,000 memory values.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\nE-MAIL<\/h3>\n<\/div>\n\n\nNotification by e-mail is an ideal tool for alarm and escalation management of the UMG measurement devices and the GridVis\u00ae software. This allows recipients to be informed in detail about an event straight away.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Power quality monitoring<\/li>\n
- Ethernet gateway for subordinate measuring points<\/li>\n
- Analysis of electrical disturbance variables for grid problems<\/li>\n<\/ul>\n<\/div><\/div><\/div>
\n- Report generator for various power quality standards<\/li>\n
- Control tasks, e.g. depending on measured or limit values reached<\/li>\n
- Transducer for building management system or PLC<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 40th harmonic<\/li>\n
- Unbalance Distortion factor THD-U \/ THD-I<\/li>\n
- Measurement of positive, negative and zero sequence<\/li>\n
- Short interruptions (from 20 ms)<\/li>\n
- Recording and storage of transients (> 50 \u03bcs)<\/li>\n
- Start-up processes<\/li>\n
- Fault recorder function<\/li>\n
- Rotary field display<\/li>\n<\/ul>\n<\/div><\/div><\/div>
PERFORMANCE<\/h3>\n<\/div>\n- 4 voltage and 4 current measurement inputs<\/li>\n
- Acquisition and digitization of RMS values (true RMS) of currents and voltages (15 – 440 Hz)<\/li>\n
- Continuous sampling of the voltage and current measurement inputs at 20 kHz<\/li>\n
- Recording of more than 2,000 measured values per measurement cycle (200 ms)<\/li>\n
- For measuring current events<\/li>\n
- Setting of a rated current possible<\/li>\n
- The fourth current measurement input is suitable for measuring the current in the neutral or PE conductor or for measuring any potential difference between N and PE<\/li>\n
- Large measured data memory (memory capacity = 5,000,000 measured values)<\/li>\n
- Simple remote measurement data retrieval via the device’s own homepage<\/li>\n
- All interfaces can be used simultaneously<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVINCING REPORTING WITH GRIDVIS\u00ae<\/h3>\n<\/div>\n- Automatic generation and dispatch of power quality reports<\/li>\n
- Power quality reports in accordance with EN 50160, EN 61000-2-4, IEEE519<\/li>\n
- Illustration of the ITI (CBEMA) curve<\/li>\n
- Freely definable scheduling for report generation<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Fast, cost-optimized and reliable communication thanks to the connection to an existing Ethernet architecture<\/li>\n
- Integration in PLC systems and BMS<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Simultaneous query of the interfaces possible<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
HIGHSPEED MODBUS<\/h3>\n<\/div>\n- Fast and reliable data transmission via RS485 interface<\/li>\n
- Speed up to 921.6 kB\/s<\/li>\n<\/ul>\n<\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options on the device, 7 programs simultaneously (PLC functionality)<\/li>\n
- Jasic\u00ae source<\/sup> code programming<\/li>\n
- Functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVENIENT HOMEPAGE AND E-MAIL FUNCTIONS<\/h3>\n<\/div>\n- Information conveniently available by e-mail and via the device homepage<\/li>\n
- Access to the powerful device homepage via web browser<\/li>\n
- Online data, historical data, graphs of events and much more available directly from the homepage<\/li>\n<\/ul>\n<\/div><\/div><\/div>
LARGE MEASUREMENT DATA MEMORY<\/h3>\n<\/div>\n- 128 MByte<\/li>\n
- 5,000,000 Memory values<\/li>\n
- Recording range up to 2 years<\/li>\n
- Recording freely configurable<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
Many UMG measurement devices have their own memory with typical recording ranges of up to 2 years. Recording is freely configurable. A 128 MByte memory can store around 5,000,000 memory values, a 256 MByte memory can store around 10,000,000 memory values.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
E-MAIL<\/h3>\n<\/div>\n\n\nNotification by e-mail is an ideal tool for alarm and escalation management of the UMG measurement devices and the GridVis\u00ae software. This allows recipients to be informed in detail about an event straight away.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Power quality monitoring<\/li>\n
- Ethernet gateway for subordinate measuring points<\/li>\n
- Analysis of electrical disturbance variables for grid problems<\/li>\n<\/ul>\n<\/div><\/div><\/div>
\n- Report generator for various power quality standards<\/li>\n
- Control tasks, e.g. depending on measured or limit values reached<\/li>\n
- Transducer for building management system or PLC<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 40th harmonic<\/li>\n
- Unbalance Distortion factor THD-U \/ THD-I<\/li>\n
- Measurement of positive, negative and zero sequence<\/li>\n
- Short interruptions (from 20 ms)<\/li>\n
- Recording and storage of transients (> 50 \u03bcs)<\/li>\n
- Start-up processes<\/li>\n
- Fault recorder function<\/li>\n
- Rotary field display<\/li>\n<\/ul>\n<\/div><\/div><\/div>
PERFORMANCE<\/h3>\n<\/div>\n- 4 voltage and 4 current measurement inputs<\/li>\n
- Acquisition and digitization of RMS values (true RMS) of currents and voltages (15 – 440 Hz)<\/li>\n
- Continuous sampling of the voltage and current measurement inputs at 20 kHz<\/li>\n
- Recording of more than 2,000 measured values per measurement cycle (200 ms)<\/li>\n
- For measuring current events<\/li>\n
- Setting of a rated current possible<\/li>\n
- The fourth current measurement input is suitable for measuring the current in the neutral or PE conductor or for measuring any potential difference between N and PE<\/li>\n
- Large measured data memory (memory capacity = 5,000,000 measured values)<\/li>\n
- Simple remote measurement data retrieval via the device’s own homepage<\/li>\n
- All interfaces can be used simultaneously<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVINCING REPORTING WITH GRIDVIS\u00ae<\/h3>\n<\/div>\n- Automatic generation and dispatch of power quality reports<\/li>\n
- Power quality reports in accordance with EN 50160, EN 61000-2-4, IEEE519<\/li>\n
- Illustration of the ITI (CBEMA) curve<\/li>\n
- Freely definable scheduling for report generation<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Fast, cost-optimized and reliable communication thanks to the connection to an existing Ethernet architecture<\/li>\n
- Integration in PLC systems and BMS<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Simultaneous query of the interfaces possible<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
HIGHSPEED MODBUS<\/h3>\n<\/div>\n- Fast and reliable data transmission via RS485 interface<\/li>\n
- Speed up to 921.6 kB\/s<\/li>\n<\/ul>\n<\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options on the device, 7 programs simultaneously (PLC functionality)<\/li>\n
- Jasic\u00ae source<\/sup> code programming<\/li>\n
- Functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVENIENT HOMEPAGE AND E-MAIL FUNCTIONS<\/h3>\n<\/div>\n- Information conveniently available by e-mail and via the device homepage<\/li>\n
- Access to the powerful device homepage via web browser<\/li>\n
- Online data, historical data, graphs of events and much more available directly from the homepage<\/li>\n<\/ul>\n<\/div><\/div><\/div>
LARGE MEASUREMENT DATA MEMORY<\/h3>\n<\/div>\n- 128 MByte<\/li>\n
- 5,000,000 Memory values<\/li>\n
- Recording range up to 2 years<\/li>\n
- Recording freely configurable<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
Notification by e-mail is an ideal tool for alarm and escalation management of the UMG measurement devices and the GridVis\u00ae software. This allows recipients to be informed in detail about an event straight away.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Power quality monitoring<\/li>\n
- Ethernet gateway for subordinate measuring points<\/li>\n
- Analysis of electrical disturbance variables for grid problems<\/li>\n<\/ul>\n<\/div><\/div><\/div>
\n- Report generator for various power quality standards<\/li>\n
- Control tasks, e.g. depending on measured or limit values reached<\/li>\n
- Transducer for building management system or PLC<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 40th harmonic<\/li>\n
- Unbalance Distortion factor THD-U \/ THD-I<\/li>\n
- Measurement of positive, negative and zero sequence<\/li>\n
- Short interruptions (from 20 ms)<\/li>\n
- Recording and storage of transients (> 50 \u03bcs)<\/li>\n
- Start-up processes<\/li>\n
- Fault recorder function<\/li>\n
- Rotary field display<\/li>\n<\/ul>\n<\/div><\/div><\/div>
PERFORMANCE<\/h3>\n<\/div>\n- 4 voltage and 4 current measurement inputs<\/li>\n
- Acquisition and digitization of RMS values (true RMS) of currents and voltages (15 – 440 Hz)<\/li>\n
- Continuous sampling of the voltage and current measurement inputs at 20 kHz<\/li>\n
- Recording of more than 2,000 measured values per measurement cycle (200 ms)<\/li>\n
- For measuring current events<\/li>\n
- Setting of a rated current possible<\/li>\n
- The fourth current measurement input is suitable for measuring the current in the neutral or PE conductor or for measuring any potential difference between N and PE<\/li>\n
- Large measured data memory (memory capacity = 5,000,000 measured values)<\/li>\n
- Simple remote measurement data retrieval via the device’s own homepage<\/li>\n
- All interfaces can be used simultaneously<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVINCING REPORTING WITH GRIDVIS\u00ae<\/h3>\n<\/div>\n- Automatic generation and dispatch of power quality reports<\/li>\n
- Power quality reports in accordance with EN 50160, EN 61000-2-4, IEEE519<\/li>\n
- Illustration of the ITI (CBEMA) curve<\/li>\n
- Freely definable scheduling for report generation<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Fast, cost-optimized and reliable communication thanks to the connection to an existing Ethernet architecture<\/li>\n
- Integration in PLC systems and BMS<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Simultaneous query of the interfaces possible<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
HIGHSPEED MODBUS<\/h3>\n<\/div>\n- Fast and reliable data transmission via RS485 interface<\/li>\n
- Speed up to 921.6 kB\/s<\/li>\n<\/ul>\n<\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options on the device, 7 programs simultaneously (PLC functionality)<\/li>\n
- Jasic\u00ae source<\/sup> code programming<\/li>\n
- Functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVENIENT HOMEPAGE AND E-MAIL FUNCTIONS<\/h3>\n<\/div>\n- Information conveniently available by e-mail and via the device homepage<\/li>\n
- Access to the powerful device homepage via web browser<\/li>\n
- Online data, historical data, graphs of events and much more available directly from the homepage<\/li>\n<\/ul>\n<\/div><\/div><\/div>
LARGE MEASUREMENT DATA MEMORY<\/h3>\n<\/div>\n- 128 MByte<\/li>\n
- 5,000,000 Memory values<\/li>\n
- Recording range up to 2 years<\/li>\n
- Recording freely configurable<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
- \n
- Power quality monitoring<\/li>\n
- Ethernet gateway for subordinate measuring points<\/li>\n
- Analysis of electrical disturbance variables for grid problems<\/li>\n<\/ul>\n<\/div><\/div><\/div>
- \n
- Report generator for various power quality standards<\/li>\n
- Control tasks, e.g. depending on measured or limit values reached<\/li>\n
- Transducer for building management system or PLC<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>
- \n
- Harmonic analysis up to the 40th harmonic<\/li>\n
- Unbalance Distortion factor THD-U \/ THD-I<\/li>\n
- Measurement of positive, negative and zero sequence<\/li>\n
- Short interruptions (from 20 ms)<\/li>\n
- Recording and storage of transients (> 50 \u03bcs)<\/li>\n
- Start-up processes<\/li>\n
- Fault recorder function<\/li>\n
- Rotary field display<\/li>\n<\/ul>\n<\/div><\/div><\/div>
PERFORMANCE<\/h3>\n<\/div>
- \n
- 4 voltage and 4 current measurement inputs<\/li>\n
- Acquisition and digitization of RMS values (true RMS) of currents and voltages (15 – 440 Hz)<\/li>\n
- Continuous sampling of the voltage and current measurement inputs at 20 kHz<\/li>\n
- Recording of more than 2,000 measured values per measurement cycle (200 ms)<\/li>\n
- For measuring current events<\/li>\n
- Setting of a rated current possible<\/li>\n
- The fourth current measurement input is suitable for measuring the current in the neutral or PE conductor or for measuring any potential difference between N and PE<\/li>\n
- Large measured data memory (memory capacity = 5,000,000 measured values)<\/li>\n
- Simple remote measurement data retrieval via the device’s own homepage<\/li>\n
- All interfaces can be used simultaneously<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVINCING REPORTING WITH GRIDVIS\u00ae<\/h3>\n<\/div>
- \n
- Automatic generation and dispatch of power quality reports<\/li>\n
- Power quality reports in accordance with EN 50160, EN 61000-2-4, IEEE519<\/li>\n
- Illustration of the ITI (CBEMA) curve<\/li>\n
- Freely definable scheduling for report generation<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>
- \n
- Fast, cost-optimized and reliable communication thanks to the connection to an existing Ethernet architecture<\/li>\n
- Integration in PLC systems and BMS<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Simultaneous query of the interfaces possible<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
HIGHSPEED MODBUS<\/h3>\n<\/div>
- \n
- Fast and reliable data transmission via RS485 interface<\/li>\n
- Speed up to 921.6 kB\/s<\/li>\n<\/ul>\n<\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>
- \n
- Extensive programming options on the device, 7 programs simultaneously (PLC functionality)<\/li>\n
- Jasic\u00ae source<\/sup> code programming<\/li>\n
- Functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
CONVENIENT HOMEPAGE AND E-MAIL FUNCTIONS<\/h3>\n<\/div>
- \n
- Information conveniently available by e-mail and via the device homepage<\/li>\n
- Access to the powerful device homepage via web browser<\/li>\n
- Online data, historical data, graphs of events and much more available directly from the homepage<\/li>\n<\/ul>\n<\/div><\/div><\/div>
LARGE MEASUREMENT DATA MEMORY<\/h3>\n<\/div>
- \n
- 128 MByte<\/li>\n
- 5,000,000 Memory values<\/li>\n
- Recording range up to 2 years<\/li>\n
- Recording freely configurable<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
![\"\"](\"https:\/\/www.energie-plan.at\/epm\/wp-content\/uploads\/2023\/03\/Geraete-Homepage-1.jpg\")
<\/a><\/div>