MULTIFUNCTIONAL NETWORK ANALYZER WITH RCM<\/h2>\n<\/div>The UMG 509-PRO is a powerful grid analyzer with residual current monitoring that measures harmonics up to the 63rd harmonic. The analyzer has two digital inputs and two digital outputs.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
MAIN FEATURES OF THE UMG 509-PRO<\/h2>\n<\/div>\n\n\n\n\n\n\nVOLTAGE QUALITY<\/h4>\n<\/div>\n\nReliable operation of modern installations and systems always requires a high level of supply reliability and good power quality. UMG measurement devices reliably record, analyze and document all disturbance variables, such as harmonics, unbalances, transients, voltage dips, overvoltages, flicker, phase shift and reactive power.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\nREPORTING<\/h4>\n<\/div>\n\nAn important component of the grid analysis is the report generation of GridVis\u00ae. It provides a quick and clear representation of the voltage quality in defined time periods. The power quality reports are based on international standards (EN 50160, EN 61000-2-4, IEEE 519, etc.). In addition to the PQ reports, energy consumption reports are of great benefit to the user. Generation and dispatch can take place automatically according to freely definable schedules.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\nHARMONICS<\/h4>\n<\/div>\n\nHarmonics are caused by equipment with non-linear characteristics, such as transformers operated in saturation, energy-saving lamps, frequency converters and power electronics. They burden the grid with additional currents and can affect or even destroy equipment. These grid perturbations can be detected and documented using power quality analyzers.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nDIFFERENTIAL CURRENT (RCM)<\/h4>\n<\/div>\n\nA conductive RCM residual current monitor detects fault currents at an early stage, before they lead to system failures or even fires. It is already integrated in certain UMG measuring devices. The required RCM measuring current transformers can be retrofitted if required. Continuous RCM monitoring significantly increases system safety and availability. In certain applications such as data centers, residual current monitoring is mandatory due to the requirements for high availability.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nALARM MANAGEMENT<\/h4>\n<\/div>\n\nThe GridVis\u00ae alarm management system monitors all measurement parameters obtained by the UMG measurement devices. It includes escalation management, logbook function and user administration for individual notifications by e-mail, pop-up window on the monitor, etc.<\/p>\n
In addition to monitoring RMS values, short-term interruptions and transients as well as communication with the measuring devices can also be monitored.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nETHERNET-MODBUS-GATEWAY<\/h4>\n<\/div>\n\nModbus RTU devices that are connected to the master device as slaves can be very easily integrated into an Ethernet architecture via the Ethernet Modbus gateway. For devices with an identical file format and matching function codes, this is possible directly via the Modbus RTU interface.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Continuous monitoring of the power quality<\/li>\n
- Energy management systems (ISO 50001)<\/li>\n
- Master device with Ethernet gateway for subordinate measuring points<\/li>\n
- Visualization of the energy supply in the NSHV<\/li>\n<\/ul>\n
\n- Analysis of electrical disturbance variables for grid problems<\/li>\n
- Cost center analysis<\/li>\n
- Remote monitoring in real estate operations<\/li>\n
- Use in test fields (e.g. in universities)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 63rd harmonic<\/li>\n
- Recording of short-term interruptions<\/li>\n
- Transient detection<\/li>\n
- Display the waveform (current and voltage)<\/li>\n
- Asymmetry<\/li>\n
- Pointer diagram<\/li>\n<\/ul>\n<\/div><\/div><\/div>
RCM RESIDUAL CURRENT MONITORING<\/h3>\n<\/div>\n- Continuous monitoring of residual currents (Residual Current Monitor, RCM)<\/li>\n
- Defining a digital input when the response value of an electrical system is exceeded<\/li>\n
- Timely response option for initiating countermeasures<\/li>\n
- Permanent RCM measurement for systems in continuous operation without shutdown option<\/li>\n
- Ideal for the ZEP (central earthing point in TN-S systems)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Ethernet interface and web server<\/li>\n
- Fast, cost-optimized and reliable communication setup<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Integration into PLC systems and BMS through additional interfaces<\/li>\n
- Up to 4 ports simultaneously<\/li>\n
- Versatile IP protocols<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODBUS GATEWAY FUNCTION<\/h3>\n<\/div>\n- Cost-effective connection of devices without an Ethernet interface<\/li>\n
- Integration of devices with Modbus RTU interface possible (agreement on data format and function code required)<\/li>\n
- Data scalable and writable<\/li>\n
- Minimizing the number of IP addresses required<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options (PLC functionality)<\/li>\n
- Jasic\u00ae source code programming<\/li>\n
- Sustainable functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div>
ALARM MANAGEMENT<\/h3>\n<\/div>\n- Programmable via graphical programming or Jasic\u00ae source code<\/li>\n
- All measured values can be used<\/li>\n
- Mathematically arbitrary to process<\/li>\n
- Individual forwarding via e-mail dispatch, switching of digital outputs, description of Modbus addresses, etc.<\/li>\n
- Watchdog APPs<\/li>\n
- Further alarm management functions via the GridVis\u00ae service alarm management<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
The UMG 509-PRO is a powerful grid analyzer with residual current monitoring that measures harmonics up to the 63rd harmonic. The analyzer has two digital inputs and two digital outputs.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
MAIN FEATURES OF THE UMG 509-PRO<\/h2>\n<\/div>\n\n\n\n\n\n\nVOLTAGE QUALITY<\/h4>\n<\/div>\n\nReliable operation of modern installations and systems always requires a high level of supply reliability and good power quality. UMG measurement devices reliably record, analyze and document all disturbance variables, such as harmonics, unbalances, transients, voltage dips, overvoltages, flicker, phase shift and reactive power.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\nREPORTING<\/h4>\n<\/div>\n\nAn important component of the grid analysis is the report generation of GridVis\u00ae. It provides a quick and clear representation of the voltage quality in defined time periods. The power quality reports are based on international standards (EN 50160, EN 61000-2-4, IEEE 519, etc.). In addition to the PQ reports, energy consumption reports are of great benefit to the user. Generation and dispatch can take place automatically according to freely definable schedules.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\nHARMONICS<\/h4>\n<\/div>\n\nHarmonics are caused by equipment with non-linear characteristics, such as transformers operated in saturation, energy-saving lamps, frequency converters and power electronics. They burden the grid with additional currents and can affect or even destroy equipment. These grid perturbations can be detected and documented using power quality analyzers.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nDIFFERENTIAL CURRENT (RCM)<\/h4>\n<\/div>\n\nA conductive RCM residual current monitor detects fault currents at an early stage, before they lead to system failures or even fires. It is already integrated in certain UMG measuring devices. The required RCM measuring current transformers can be retrofitted if required. Continuous RCM monitoring significantly increases system safety and availability. In certain applications such as data centers, residual current monitoring is mandatory due to the requirements for high availability.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nALARM MANAGEMENT<\/h4>\n<\/div>\n\nThe GridVis\u00ae alarm management system monitors all measurement parameters obtained by the UMG measurement devices. It includes escalation management, logbook function and user administration for individual notifications by e-mail, pop-up window on the monitor, etc.<\/p>\n
In addition to monitoring RMS values, short-term interruptions and transients as well as communication with the measuring devices can also be monitored.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nETHERNET-MODBUS-GATEWAY<\/h4>\n<\/div>\n\nModbus RTU devices that are connected to the master device as slaves can be very easily integrated into an Ethernet architecture via the Ethernet Modbus gateway. For devices with an identical file format and matching function codes, this is possible directly via the Modbus RTU interface.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Continuous monitoring of the power quality<\/li>\n
- Energy management systems (ISO 50001)<\/li>\n
- Master device with Ethernet gateway for subordinate measuring points<\/li>\n
- Visualization of the energy supply in the NSHV<\/li>\n<\/ul>\n
\n- Analysis of electrical disturbance variables for grid problems<\/li>\n
- Cost center analysis<\/li>\n
- Remote monitoring in real estate operations<\/li>\n
- Use in test fields (e.g. in universities)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 63rd harmonic<\/li>\n
- Recording of short-term interruptions<\/li>\n
- Transient detection<\/li>\n
- Display the waveform (current and voltage)<\/li>\n
- Asymmetry<\/li>\n
- Pointer diagram<\/li>\n<\/ul>\n<\/div><\/div><\/div>
RCM RESIDUAL CURRENT MONITORING<\/h3>\n<\/div>\n- Continuous monitoring of residual currents (Residual Current Monitor, RCM)<\/li>\n
- Defining a digital input when the response value of an electrical system is exceeded<\/li>\n
- Timely response option for initiating countermeasures<\/li>\n
- Permanent RCM measurement for systems in continuous operation without shutdown option<\/li>\n
- Ideal for the ZEP (central earthing point in TN-S systems)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Ethernet interface and web server<\/li>\n
- Fast, cost-optimized and reliable communication setup<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Integration into PLC systems and BMS through additional interfaces<\/li>\n
- Up to 4 ports simultaneously<\/li>\n
- Versatile IP protocols<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODBUS GATEWAY FUNCTION<\/h3>\n<\/div>\n- Cost-effective connection of devices without an Ethernet interface<\/li>\n
- Integration of devices with Modbus RTU interface possible (agreement on data format and function code required)<\/li>\n
- Data scalable and writable<\/li>\n
- Minimizing the number of IP addresses required<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options (PLC functionality)<\/li>\n
- Jasic\u00ae source code programming<\/li>\n
- Sustainable functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div>
ALARM MANAGEMENT<\/h3>\n<\/div>\n- Programmable via graphical programming or Jasic\u00ae source code<\/li>\n
- All measured values can be used<\/li>\n
- Mathematically arbitrary to process<\/li>\n
- Individual forwarding via e-mail dispatch, switching of digital outputs, description of Modbus addresses, etc.<\/li>\n
- Watchdog APPs<\/li>\n
- Further alarm management functions via the GridVis\u00ae service alarm management<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h4>\n<\/div>\n\nReliable operation of modern installations and systems always requires a high level of supply reliability and good power quality. UMG measurement devices reliably record, analyze and document all disturbance variables, such as harmonics, unbalances, transients, voltage dips, overvoltages, flicker, phase shift and reactive power.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\nREPORTING<\/h4>\n<\/div>\n\nAn important component of the grid analysis is the report generation of GridVis\u00ae. It provides a quick and clear representation of the voltage quality in defined time periods. The power quality reports are based on international standards (EN 50160, EN 61000-2-4, IEEE 519, etc.). In addition to the PQ reports, energy consumption reports are of great benefit to the user. Generation and dispatch can take place automatically according to freely definable schedules.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\nHARMONICS<\/h4>\n<\/div>\n\nHarmonics are caused by equipment with non-linear characteristics, such as transformers operated in saturation, energy-saving lamps, frequency converters and power electronics. They burden the grid with additional currents and can affect or even destroy equipment. These grid perturbations can be detected and documented using power quality analyzers.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nDIFFERENTIAL CURRENT (RCM)<\/h4>\n<\/div>\n\nA conductive RCM residual current monitor detects fault currents at an early stage, before they lead to system failures or even fires. It is already integrated in certain UMG measuring devices. The required RCM measuring current transformers can be retrofitted if required. Continuous RCM monitoring significantly increases system safety and availability. In certain applications such as data centers, residual current monitoring is mandatory due to the requirements for high availability.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nALARM MANAGEMENT<\/h4>\n<\/div>\n\nThe GridVis\u00ae alarm management system monitors all measurement parameters obtained by the UMG measurement devices. It includes escalation management, logbook function and user administration for individual notifications by e-mail, pop-up window on the monitor, etc.<\/p>\n
In addition to monitoring RMS values, short-term interruptions and transients as well as communication with the measuring devices can also be monitored.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nETHERNET-MODBUS-GATEWAY<\/h4>\n<\/div>\n\nModbus RTU devices that are connected to the master device as slaves can be very easily integrated into an Ethernet architecture via the Ethernet Modbus gateway. For devices with an identical file format and matching function codes, this is possible directly via the Modbus RTU interface.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Continuous monitoring of the power quality<\/li>\n
- Energy management systems (ISO 50001)<\/li>\n
- Master device with Ethernet gateway for subordinate measuring points<\/li>\n
- Visualization of the energy supply in the NSHV<\/li>\n<\/ul>\n
\n- Analysis of electrical disturbance variables for grid problems<\/li>\n
- Cost center analysis<\/li>\n
- Remote monitoring in real estate operations<\/li>\n
- Use in test fields (e.g. in universities)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 63rd harmonic<\/li>\n
- Recording of short-term interruptions<\/li>\n
- Transient detection<\/li>\n
- Display the waveform (current and voltage)<\/li>\n
- Asymmetry<\/li>\n
- Pointer diagram<\/li>\n<\/ul>\n<\/div><\/div><\/div>
RCM RESIDUAL CURRENT MONITORING<\/h3>\n<\/div>\n- Continuous monitoring of residual currents (Residual Current Monitor, RCM)<\/li>\n
- Defining a digital input when the response value of an electrical system is exceeded<\/li>\n
- Timely response option for initiating countermeasures<\/li>\n
- Permanent RCM measurement for systems in continuous operation without shutdown option<\/li>\n
- Ideal for the ZEP (central earthing point in TN-S systems)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Ethernet interface and web server<\/li>\n
- Fast, cost-optimized and reliable communication setup<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Integration into PLC systems and BMS through additional interfaces<\/li>\n
- Up to 4 ports simultaneously<\/li>\n
- Versatile IP protocols<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODBUS GATEWAY FUNCTION<\/h3>\n<\/div>\n- Cost-effective connection of devices without an Ethernet interface<\/li>\n
- Integration of devices with Modbus RTU interface possible (agreement on data format and function code required)<\/li>\n
- Data scalable and writable<\/li>\n
- Minimizing the number of IP addresses required<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options (PLC functionality)<\/li>\n
- Jasic\u00ae source code programming<\/li>\n
- Sustainable functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div>
ALARM MANAGEMENT<\/h3>\n<\/div>\n- Programmable via graphical programming or Jasic\u00ae source code<\/li>\n
- All measured values can be used<\/li>\n
- Mathematically arbitrary to process<\/li>\n
- Individual forwarding via e-mail dispatch, switching of digital outputs, description of Modbus addresses, etc.<\/li>\n
- Watchdog APPs<\/li>\n
- Further alarm management functions via the GridVis\u00ae service alarm management<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
Reliable operation of modern installations and systems always requires a high level of supply reliability and good power quality. UMG measurement devices reliably record, analyze and document all disturbance variables, such as harmonics, unbalances, transients, voltage dips, overvoltages, flicker, phase shift and reactive power.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
REPORTING<\/h4>\n<\/div>\n\nAn important component of the grid analysis is the report generation of GridVis\u00ae. It provides a quick and clear representation of the voltage quality in defined time periods. The power quality reports are based on international standards (EN 50160, EN 61000-2-4, IEEE 519, etc.). In addition to the PQ reports, energy consumption reports are of great benefit to the user. Generation and dispatch can take place automatically according to freely definable schedules.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\nHARMONICS<\/h4>\n<\/div>\n\nHarmonics are caused by equipment with non-linear characteristics, such as transformers operated in saturation, energy-saving lamps, frequency converters and power electronics. They burden the grid with additional currents and can affect or even destroy equipment. These grid perturbations can be detected and documented using power quality analyzers.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nDIFFERENTIAL CURRENT (RCM)<\/h4>\n<\/div>\n\nA conductive RCM residual current monitor detects fault currents at an early stage, before they lead to system failures or even fires. It is already integrated in certain UMG measuring devices. The required RCM measuring current transformers can be retrofitted if required. Continuous RCM monitoring significantly increases system safety and availability. In certain applications such as data centers, residual current monitoring is mandatory due to the requirements for high availability.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nALARM MANAGEMENT<\/h4>\n<\/div>\n\nThe GridVis\u00ae alarm management system monitors all measurement parameters obtained by the UMG measurement devices. It includes escalation management, logbook function and user administration for individual notifications by e-mail, pop-up window on the monitor, etc.<\/p>\n
In addition to monitoring RMS values, short-term interruptions and transients as well as communication with the measuring devices can also be monitored.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nETHERNET-MODBUS-GATEWAY<\/h4>\n<\/div>\n\nModbus RTU devices that are connected to the master device as slaves can be very easily integrated into an Ethernet architecture via the Ethernet Modbus gateway. For devices with an identical file format and matching function codes, this is possible directly via the Modbus RTU interface.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Continuous monitoring of the power quality<\/li>\n
- Energy management systems (ISO 50001)<\/li>\n
- Master device with Ethernet gateway for subordinate measuring points<\/li>\n
- Visualization of the energy supply in the NSHV<\/li>\n<\/ul>\n
\n- Analysis of electrical disturbance variables for grid problems<\/li>\n
- Cost center analysis<\/li>\n
- Remote monitoring in real estate operations<\/li>\n
- Use in test fields (e.g. in universities)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 63rd harmonic<\/li>\n
- Recording of short-term interruptions<\/li>\n
- Transient detection<\/li>\n
- Display the waveform (current and voltage)<\/li>\n
- Asymmetry<\/li>\n
- Pointer diagram<\/li>\n<\/ul>\n<\/div><\/div><\/div>
RCM RESIDUAL CURRENT MONITORING<\/h3>\n<\/div>\n- Continuous monitoring of residual currents (Residual Current Monitor, RCM)<\/li>\n
- Defining a digital input when the response value of an electrical system is exceeded<\/li>\n
- Timely response option for initiating countermeasures<\/li>\n
- Permanent RCM measurement for systems in continuous operation without shutdown option<\/li>\n
- Ideal for the ZEP (central earthing point in TN-S systems)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Ethernet interface and web server<\/li>\n
- Fast, cost-optimized and reliable communication setup<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Integration into PLC systems and BMS through additional interfaces<\/li>\n
- Up to 4 ports simultaneously<\/li>\n
- Versatile IP protocols<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODBUS GATEWAY FUNCTION<\/h3>\n<\/div>\n- Cost-effective connection of devices without an Ethernet interface<\/li>\n
- Integration of devices with Modbus RTU interface possible (agreement on data format and function code required)<\/li>\n
- Data scalable and writable<\/li>\n
- Minimizing the number of IP addresses required<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options (PLC functionality)<\/li>\n
- Jasic\u00ae source code programming<\/li>\n
- Sustainable functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div>
ALARM MANAGEMENT<\/h3>\n<\/div>\n- Programmable via graphical programming or Jasic\u00ae source code<\/li>\n
- All measured values can be used<\/li>\n
- Mathematically arbitrary to process<\/li>\n
- Individual forwarding via e-mail dispatch, switching of digital outputs, description of Modbus addresses, etc.<\/li>\n
- Watchdog APPs<\/li>\n
- Further alarm management functions via the GridVis\u00ae service alarm management<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
An important component of the grid analysis is the report generation of GridVis\u00ae. It provides a quick and clear representation of the voltage quality in defined time periods. The power quality reports are based on international standards (EN 50160, EN 61000-2-4, IEEE 519, etc.). In addition to the PQ reports, energy consumption reports are of great benefit to the user. Generation and dispatch can take place automatically according to freely definable schedules.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
HARMONICS<\/h4>\n<\/div>\n\nHarmonics are caused by equipment with non-linear characteristics, such as transformers operated in saturation, energy-saving lamps, frequency converters and power electronics. They burden the grid with additional currents and can affect or even destroy equipment. These grid perturbations can be detected and documented using power quality analyzers.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nDIFFERENTIAL CURRENT (RCM)<\/h4>\n<\/div>\n\nA conductive RCM residual current monitor detects fault currents at an early stage, before they lead to system failures or even fires. It is already integrated in certain UMG measuring devices. The required RCM measuring current transformers can be retrofitted if required. Continuous RCM monitoring significantly increases system safety and availability. In certain applications such as data centers, residual current monitoring is mandatory due to the requirements for high availability.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nALARM MANAGEMENT<\/h4>\n<\/div>\n\nThe GridVis\u00ae alarm management system monitors all measurement parameters obtained by the UMG measurement devices. It includes escalation management, logbook function and user administration for individual notifications by e-mail, pop-up window on the monitor, etc.<\/p>\n
In addition to monitoring RMS values, short-term interruptions and transients as well as communication with the measuring devices can also be monitored.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nETHERNET-MODBUS-GATEWAY<\/h4>\n<\/div>\n\nModbus RTU devices that are connected to the master device as slaves can be very easily integrated into an Ethernet architecture via the Ethernet Modbus gateway. For devices with an identical file format and matching function codes, this is possible directly via the Modbus RTU interface.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Continuous monitoring of the power quality<\/li>\n
- Energy management systems (ISO 50001)<\/li>\n
- Master device with Ethernet gateway for subordinate measuring points<\/li>\n
- Visualization of the energy supply in the NSHV<\/li>\n<\/ul>\n
\n- Analysis of electrical disturbance variables for grid problems<\/li>\n
- Cost center analysis<\/li>\n
- Remote monitoring in real estate operations<\/li>\n
- Use in test fields (e.g. in universities)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 63rd harmonic<\/li>\n
- Recording of short-term interruptions<\/li>\n
- Transient detection<\/li>\n
- Display the waveform (current and voltage)<\/li>\n
- Asymmetry<\/li>\n
- Pointer diagram<\/li>\n<\/ul>\n<\/div><\/div><\/div>
RCM RESIDUAL CURRENT MONITORING<\/h3>\n<\/div>\n- Continuous monitoring of residual currents (Residual Current Monitor, RCM)<\/li>\n
- Defining a digital input when the response value of an electrical system is exceeded<\/li>\n
- Timely response option for initiating countermeasures<\/li>\n
- Permanent RCM measurement for systems in continuous operation without shutdown option<\/li>\n
- Ideal for the ZEP (central earthing point in TN-S systems)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Ethernet interface and web server<\/li>\n
- Fast, cost-optimized and reliable communication setup<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Integration into PLC systems and BMS through additional interfaces<\/li>\n
- Up to 4 ports simultaneously<\/li>\n
- Versatile IP protocols<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODBUS GATEWAY FUNCTION<\/h3>\n<\/div>\n- Cost-effective connection of devices without an Ethernet interface<\/li>\n
- Integration of devices with Modbus RTU interface possible (agreement on data format and function code required)<\/li>\n
- Data scalable and writable<\/li>\n
- Minimizing the number of IP addresses required<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options (PLC functionality)<\/li>\n
- Jasic\u00ae source code programming<\/li>\n
- Sustainable functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div>
ALARM MANAGEMENT<\/h3>\n<\/div>\n- Programmable via graphical programming or Jasic\u00ae source code<\/li>\n
- All measured values can be used<\/li>\n
- Mathematically arbitrary to process<\/li>\n
- Individual forwarding via e-mail dispatch, switching of digital outputs, description of Modbus addresses, etc.<\/li>\n
- Watchdog APPs<\/li>\n
- Further alarm management functions via the GridVis\u00ae service alarm management<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
Harmonics are caused by equipment with non-linear characteristics, such as transformers operated in saturation, energy-saving lamps, frequency converters and power electronics. They burden the grid with additional currents and can affect or even destroy equipment. These grid perturbations can be detected and documented using power quality analyzers.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
DIFFERENTIAL CURRENT (RCM)<\/h4>\n<\/div>\n\nA conductive RCM residual current monitor detects fault currents at an early stage, before they lead to system failures or even fires. It is already integrated in certain UMG measuring devices. The required RCM measuring current transformers can be retrofitted if required. Continuous RCM monitoring significantly increases system safety and availability. In certain applications such as data centers, residual current monitoring is mandatory due to the requirements for high availability.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nALARM MANAGEMENT<\/h4>\n<\/div>\n\nThe GridVis\u00ae alarm management system monitors all measurement parameters obtained by the UMG measurement devices. It includes escalation management, logbook function and user administration for individual notifications by e-mail, pop-up window on the monitor, etc.<\/p>\n
In addition to monitoring RMS values, short-term interruptions and transients as well as communication with the measuring devices can also be monitored.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nETHERNET-MODBUS-GATEWAY<\/h4>\n<\/div>\n\nModbus RTU devices that are connected to the master device as slaves can be very easily integrated into an Ethernet architecture via the Ethernet Modbus gateway. For devices with an identical file format and matching function codes, this is possible directly via the Modbus RTU interface.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Continuous monitoring of the power quality<\/li>\n
- Energy management systems (ISO 50001)<\/li>\n
- Master device with Ethernet gateway for subordinate measuring points<\/li>\n
- Visualization of the energy supply in the NSHV<\/li>\n<\/ul>\n
\n- Analysis of electrical disturbance variables for grid problems<\/li>\n
- Cost center analysis<\/li>\n
- Remote monitoring in real estate operations<\/li>\n
- Use in test fields (e.g. in universities)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 63rd harmonic<\/li>\n
- Recording of short-term interruptions<\/li>\n
- Transient detection<\/li>\n
- Display the waveform (current and voltage)<\/li>\n
- Asymmetry<\/li>\n
- Pointer diagram<\/li>\n<\/ul>\n<\/div><\/div><\/div>
RCM RESIDUAL CURRENT MONITORING<\/h3>\n<\/div>\n- Continuous monitoring of residual currents (Residual Current Monitor, RCM)<\/li>\n
- Defining a digital input when the response value of an electrical system is exceeded<\/li>\n
- Timely response option for initiating countermeasures<\/li>\n
- Permanent RCM measurement for systems in continuous operation without shutdown option<\/li>\n
- Ideal for the ZEP (central earthing point in TN-S systems)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Ethernet interface and web server<\/li>\n
- Fast, cost-optimized and reliable communication setup<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Integration into PLC systems and BMS through additional interfaces<\/li>\n
- Up to 4 ports simultaneously<\/li>\n
- Versatile IP protocols<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODBUS GATEWAY FUNCTION<\/h3>\n<\/div>\n- Cost-effective connection of devices without an Ethernet interface<\/li>\n
- Integration of devices with Modbus RTU interface possible (agreement on data format and function code required)<\/li>\n
- Data scalable and writable<\/li>\n
- Minimizing the number of IP addresses required<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options (PLC functionality)<\/li>\n
- Jasic\u00ae source code programming<\/li>\n
- Sustainable functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div>
ALARM MANAGEMENT<\/h3>\n<\/div>\n- Programmable via graphical programming or Jasic\u00ae source code<\/li>\n
- All measured values can be used<\/li>\n
- Mathematically arbitrary to process<\/li>\n
- Individual forwarding via e-mail dispatch, switching of digital outputs, description of Modbus addresses, etc.<\/li>\n
- Watchdog APPs<\/li>\n
- Further alarm management functions via the GridVis\u00ae service alarm management<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
A conductive RCM residual current monitor detects fault currents at an early stage, before they lead to system failures or even fires. It is already integrated in certain UMG measuring devices. The required RCM measuring current transformers can be retrofitted if required. Continuous RCM monitoring significantly increases system safety and availability. In certain applications such as data centers, residual current monitoring is mandatory due to the requirements for high availability.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
ALARM MANAGEMENT<\/h4>\n<\/div>\n\nThe GridVis\u00ae alarm management system monitors all measurement parameters obtained by the UMG measurement devices. It includes escalation management, logbook function and user administration for individual notifications by e-mail, pop-up window on the monitor, etc.<\/p>\n
In addition to monitoring RMS values, short-term interruptions and transients as well as communication with the measuring devices can also be monitored.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
\n\n\n\n\n\n\n\n\nETHERNET-MODBUS-GATEWAY<\/h4>\n<\/div>\n\nModbus RTU devices that are connected to the master device as slaves can be very easily integrated into an Ethernet architecture via the Ethernet Modbus gateway. For devices with an identical file format and matching function codes, this is possible directly via the Modbus RTU interface.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Continuous monitoring of the power quality<\/li>\n
- Energy management systems (ISO 50001)<\/li>\n
- Master device with Ethernet gateway for subordinate measuring points<\/li>\n
- Visualization of the energy supply in the NSHV<\/li>\n<\/ul>\n
\n- Analysis of electrical disturbance variables for grid problems<\/li>\n
- Cost center analysis<\/li>\n
- Remote monitoring in real estate operations<\/li>\n
- Use in test fields (e.g. in universities)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 63rd harmonic<\/li>\n
- Recording of short-term interruptions<\/li>\n
- Transient detection<\/li>\n
- Display the waveform (current and voltage)<\/li>\n
- Asymmetry<\/li>\n
- Pointer diagram<\/li>\n<\/ul>\n<\/div><\/div><\/div>
RCM RESIDUAL CURRENT MONITORING<\/h3>\n<\/div>\n- Continuous monitoring of residual currents (Residual Current Monitor, RCM)<\/li>\n
- Defining a digital input when the response value of an electrical system is exceeded<\/li>\n
- Timely response option for initiating countermeasures<\/li>\n
- Permanent RCM measurement for systems in continuous operation without shutdown option<\/li>\n
- Ideal for the ZEP (central earthing point in TN-S systems)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Ethernet interface and web server<\/li>\n
- Fast, cost-optimized and reliable communication setup<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Integration into PLC systems and BMS through additional interfaces<\/li>\n
- Up to 4 ports simultaneously<\/li>\n
- Versatile IP protocols<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODBUS GATEWAY FUNCTION<\/h3>\n<\/div>\n- Cost-effective connection of devices without an Ethernet interface<\/li>\n
- Integration of devices with Modbus RTU interface possible (agreement on data format and function code required)<\/li>\n
- Data scalable and writable<\/li>\n
- Minimizing the number of IP addresses required<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options (PLC functionality)<\/li>\n
- Jasic\u00ae source code programming<\/li>\n
- Sustainable functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div>
ALARM MANAGEMENT<\/h3>\n<\/div>\n- Programmable via graphical programming or Jasic\u00ae source code<\/li>\n
- All measured values can be used<\/li>\n
- Mathematically arbitrary to process<\/li>\n
- Individual forwarding via e-mail dispatch, switching of digital outputs, description of Modbus addresses, etc.<\/li>\n
- Watchdog APPs<\/li>\n
- Further alarm management functions via the GridVis\u00ae service alarm management<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
The GridVis\u00ae alarm management system monitors all measurement parameters obtained by the UMG measurement devices. It includes escalation management, logbook function and user administration for individual notifications by e-mail, pop-up window on the monitor, etc.<\/p>\n
In addition to monitoring RMS values, short-term interruptions and transients as well as communication with the measuring devices can also be monitored.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div>
ETHERNET-MODBUS-GATEWAY<\/h4>\n<\/div>\n\nModbus RTU devices that are connected to the master device as slaves can be very easily integrated into an Ethernet architecture via the Ethernet Modbus gateway. For devices with an identical file format and matching function codes, this is possible directly via the Modbus RTU interface.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Continuous monitoring of the power quality<\/li>\n
- Energy management systems (ISO 50001)<\/li>\n
- Master device with Ethernet gateway for subordinate measuring points<\/li>\n
- Visualization of the energy supply in the NSHV<\/li>\n<\/ul>\n
\n- Analysis of electrical disturbance variables for grid problems<\/li>\n
- Cost center analysis<\/li>\n
- Remote monitoring in real estate operations<\/li>\n
- Use in test fields (e.g. in universities)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 63rd harmonic<\/li>\n
- Recording of short-term interruptions<\/li>\n
- Transient detection<\/li>\n
- Display the waveform (current and voltage)<\/li>\n
- Asymmetry<\/li>\n
- Pointer diagram<\/li>\n<\/ul>\n<\/div><\/div><\/div>
RCM RESIDUAL CURRENT MONITORING<\/h3>\n<\/div>\n- Continuous monitoring of residual currents (Residual Current Monitor, RCM)<\/li>\n
- Defining a digital input when the response value of an electrical system is exceeded<\/li>\n
- Timely response option for initiating countermeasures<\/li>\n
- Permanent RCM measurement for systems in continuous operation without shutdown option<\/li>\n
- Ideal for the ZEP (central earthing point in TN-S systems)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Ethernet interface and web server<\/li>\n
- Fast, cost-optimized and reliable communication setup<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Integration into PLC systems and BMS through additional interfaces<\/li>\n
- Up to 4 ports simultaneously<\/li>\n
- Versatile IP protocols<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODBUS GATEWAY FUNCTION<\/h3>\n<\/div>\n- Cost-effective connection of devices without an Ethernet interface<\/li>\n
- Integration of devices with Modbus RTU interface possible (agreement on data format and function code required)<\/li>\n
- Data scalable and writable<\/li>\n
- Minimizing the number of IP addresses required<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options (PLC functionality)<\/li>\n
- Jasic\u00ae source code programming<\/li>\n
- Sustainable functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div>
ALARM MANAGEMENT<\/h3>\n<\/div>\n- Programmable via graphical programming or Jasic\u00ae source code<\/li>\n
- All measured values can be used<\/li>\n
- Mathematically arbitrary to process<\/li>\n
- Individual forwarding via e-mail dispatch, switching of digital outputs, description of Modbus addresses, etc.<\/li>\n
- Watchdog APPs<\/li>\n
- Further alarm management functions via the GridVis\u00ae service alarm management<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
Modbus RTU devices that are connected to the master device as slaves can be very easily integrated into an Ethernet architecture via the Ethernet Modbus gateway. For devices with an identical file format and matching function codes, this is possible directly via the Modbus RTU interface.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Areas of application<\/h2>\n<\/div>\n- Continuous monitoring of the power quality<\/li>\n
- Energy management systems (ISO 50001)<\/li>\n
- Master device with Ethernet gateway for subordinate measuring points<\/li>\n
- Visualization of the energy supply in the NSHV<\/li>\n<\/ul>\n
\n- Analysis of electrical disturbance variables for grid problems<\/li>\n
- Cost center analysis<\/li>\n
- Remote monitoring in real estate operations<\/li>\n
- Use in test fields (e.g. in universities)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>\n- Harmonic analysis up to the 63rd harmonic<\/li>\n
- Recording of short-term interruptions<\/li>\n
- Transient detection<\/li>\n
- Display the waveform (current and voltage)<\/li>\n
- Asymmetry<\/li>\n
- Pointer diagram<\/li>\n<\/ul>\n<\/div><\/div><\/div>
RCM RESIDUAL CURRENT MONITORING<\/h3>\n<\/div>\n- Continuous monitoring of residual currents (Residual Current Monitor, RCM)<\/li>\n
- Defining a digital input when the response value of an electrical system is exceeded<\/li>\n
- Timely response option for initiating countermeasures<\/li>\n
- Permanent RCM measurement for systems in continuous operation without shutdown option<\/li>\n
- Ideal for the ZEP (central earthing point in TN-S systems)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>\n- Ethernet interface and web server<\/li>\n
- Fast, cost-optimized and reliable communication setup<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Integration into PLC systems and BMS through additional interfaces<\/li>\n
- Up to 4 ports simultaneously<\/li>\n
- Versatile IP protocols<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODBUS GATEWAY FUNCTION<\/h3>\n<\/div>\n- Cost-effective connection of devices without an Ethernet interface<\/li>\n
- Integration of devices with Modbus RTU interface possible (agreement on data format and function code required)<\/li>\n
- Data scalable and writable<\/li>\n
- Minimizing the number of IP addresses required<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>\n- Extensive programming options (PLC functionality)<\/li>\n
- Jasic\u00ae source code programming<\/li>\n
- Sustainable functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div>
ALARM MANAGEMENT<\/h3>\n<\/div>\n- Programmable via graphical programming or Jasic\u00ae source code<\/li>\n
- All measured values can be used<\/li>\n
- Mathematically arbitrary to process<\/li>\n
- Individual forwarding via e-mail dispatch, switching of digital outputs, description of Modbus addresses, etc.<\/li>\n
- Watchdog APPs<\/li>\n
- Further alarm management functions via the GridVis\u00ae service alarm management<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
- \n
- Continuous monitoring of the power quality<\/li>\n
- Energy management systems (ISO 50001)<\/li>\n
- Master device with Ethernet gateway for subordinate measuring points<\/li>\n
- Visualization of the energy supply in the NSHV<\/li>\n<\/ul>\n
- \n
- Analysis of electrical disturbance variables for grid problems<\/li>\n
- Cost center analysis<\/li>\n
- Remote monitoring in real estate operations<\/li>\n
- Use in test fields (e.g. in universities)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
VOLTAGE QUALITY<\/h3>\n<\/div>
- \n
- Harmonic analysis up to the 63rd harmonic<\/li>\n
- Recording of short-term interruptions<\/li>\n
- Transient detection<\/li>\n
- Display the waveform (current and voltage)<\/li>\n
- Asymmetry<\/li>\n
- Pointer diagram<\/li>\n<\/ul>\n<\/div><\/div><\/div>
RCM RESIDUAL CURRENT MONITORING<\/h3>\n<\/div>
- \n
- Continuous monitoring of residual currents (Residual Current Monitor, RCM)<\/li>\n
- Defining a digital input when the response value of an electrical system is exceeded<\/li>\n
- Timely response option for initiating countermeasures<\/li>\n
- Permanent RCM measurement for systems in continuous operation without shutdown option<\/li>\n
- Ideal for the ZEP (central earthing point in TN-S systems)<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
MODERN COMMUNICATION ARCHITECTURE VIA ETHERNET<\/h3>\n<\/div>
- \n
- Ethernet interface and web server<\/li>\n
- Fast, cost-optimized and reliable communication setup<\/li>\n
- High flexibility through the use of open standards<\/li>\n
- Integration into PLC systems and BMS through additional interfaces<\/li>\n
- Up to 4 ports simultaneously<\/li>\n
- Versatile IP protocols<\/li>\n<\/ul>\n<\/div><\/div><\/div>
MODBUS GATEWAY FUNCTION<\/h3>\n<\/div>
- \n
- Cost-effective connection of devices without an Ethernet interface<\/li>\n
- Integration of devices with Modbus RTU interface possible (agreement on data format and function code required)<\/li>\n
- Data scalable and writable<\/li>\n
- Minimizing the number of IP addresses required<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
GRAPHIC PROGRAMMING<\/h3>\n<\/div>
- \n
- Extensive programming options (PLC functionality)<\/li>\n
- Jasic\u00ae source code programming<\/li>\n
- Sustainable functional enhancements far beyond pure measurement<\/li>\n
- Ready-made APPs from the Janitza library<\/li>\n<\/ul>\n<\/div><\/div><\/div>
ALARM MANAGEMENT<\/h3>\n<\/div>
- \n
- Programmable via graphical programming or Jasic\u00ae source code<\/li>\n
- All measured values can be used<\/li>\n
- Mathematically arbitrary to process<\/li>\n
- Individual forwarding via e-mail dispatch, switching of digital outputs, description of Modbus addresses, etc.<\/li>\n
- Watchdog APPs<\/li>\n
- Further alarm management functions via the GridVis\u00ae service alarm management<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
![\"\"](\"https:\/\/www.energie-plan.at\/epm\/wp-content\/uploads\/2023\/03\/Geraete-Homepage-1.jpg\")
<\/a><\/div><\/div><\/div>